R4343D1009 | Honeywell | FLAME SWITCH, ION, 115VAC* SAME DAY DELIVERY - 1 UNIT ONLY*

Same day shipping

•  Shipping Weight (Kg) : 1.3             
•  The R4343D/E series is a flame switch for intermittent operation to
    indicate presence or absence of a flame and to be applied in commercial
    or industrial burner installations. light.
•  Flame current meter jack socket on the front permits monitoring of flame
    signal strength, by using any appropriate microampere meter
    (0-10uA minimum scale).
•  Plug-in mounts onto a sub base (included) for surface mounting.
•  Providing an indication of absense or presence of a flame in intermittent
    industrial oil/gas burner applications by an open or closed relay contact. 
•  Approvals: CE approved according EN298 (for intermittent operation)
•  Protection class: IP40
•  Ambient temperature: -10...60C
•  Maximum humidity: 90%rh
•  R4343D models are for use with rectification type flame sensors, such as
   flame rods and C7012A/G UV sensors.
•  R4343E models are for use with Honeywell UV sensor models C7027,
   C7035 and C7044.
•  Note: The R4343D models will operate also with the "Satronic" IRD820/1020
    range of infrared sensors. Note that this combination is NOT CE approved
    for use on installations that fall under the GAD (Gas Appliances Directive). 
•  Outputs: 1xDPDT
•  Operation: Intermit.
•  Ionisation flame detectors
•  Flame failure response time: <1s
•  Flame detector: Rectification
•  Supply voltage: 110..120 Vac