DVC6200+HART+DOUBLE ACTING+WITH FEEDBACK | Fisher | Digital Valve Controller

Estimated Lead Time : Usually ships in 1-3 weeks.

Manufacturer : Fisher

Product no : DVC6200 

Product type : DVC6200+HART+DOUBLE ACTING+WITH FEEDBACK

Integral mounting to Fisher 657/667 or GX actuators, Window mounting to Fisher rotary actuators, Sliding-stem linear applications and Quarter-turn rotary applications.

Communication Protocol : HART 5 or HART 7

Analog Input Signa l: 4-20 mA DC, nominal; split ranging available

Instrument Power : 11 to 30 VDC at 10 mA Reverse Polarity protected

Minimum Recommended supply pressure : 0.3 bar (5 psig) higher than maximum actuator requirements

Output Signal : Pneumatic signal, up to full supply pressure. Minimum Span: 0.4 bar (6 psig) and Maximum Span: 9.5 bar (140 psig). Action: Double, Single Direct or Reverse.

Maximum Output Capacity : At 1.4 bar (20 psig) supply pressure: 10.0 normal m3/hr (375 scfh). At 5.5 bar (80 psig) supply pressure: 29.5 normal m3/hr (1100 scfh)

Operating Ambient Temperature Limits : -40 to 85C (-40 to 185F)

Independent Linearity: Typical Value: ±0.50% of output span

Vibration Testing Method : Tested per ANSI/ISA-S75.13.01 Section 5.3.5. A resonant frequency search is performed on all three axes. The instrument is subjected to the ISA specified 1/2 hour endurance test at each major resonance.

Input Impedance : An equivalent impedance of 500 ohms may be used. This value corresponds to 10V @ 20 mA.

Humidity Testing Method : Tested per IEC 61514-2

Dimensions (HxWxD), approx : 10.4 cm X 1.6 cm X 11 cm

Weight : DVC6200 Aluminum: 3.5 kg (7.7 lbs) /Stainless Steel: 8.6 kg (19 lbs)

Shipping Weight : 13 Kg